FingerTec TimeLine 100 Quick Start - Manual

w
15-01-01 THU
4 1
2
3
TCMS V2
Quick Start Guide
TimeLine 100
The Quick Start Guide is intended to provide the user with simple instructions on how
to setup the terminal date/time and communication as well as to perform card enroll-
ment and verification. For more details on other topics of terminal management, refer
to the terminal’s hardware user manual available in the package or online at
• http://info.fingertec.com/timeline100-4
© 2015 Timetec Computing Sdn Bhd. All rights reserved • 012015
Setting the Date and Time

Press Menu , go to Options and select System Options .

Select Date/Time , insert the correct value and press OK to save the
settings.
Enrolling Card Users

Press Menu , go to User Manage and select Enroll User . Select Reg RFID
and press OK when you see “ New Enroll ”.

Key in a User ID , and wave the card at the induction area until the
card ID is displayed on-screen. Press OK to save.
Communication Settings
Press Menu > Option > COM opt > Set value for IP / Subnet mask /
Gateway / Dev ID > OK to save > Restart to apply changes.
Default set value:
IP address - 192.168.1.201
Subnet mask - 255.255.255.0
Gateway - 192.168.1.1
Dev ID -1
Password - 0
Activating the Terminal on the TCMS V2 Software

Double click the TCMS V2 software icon.

Click on Devices and double click Setup FingerTec Terminals .

Click Add and enter your TCMS V2 Product Key - Refer to the reverse
side of the DVD.

Select the terminal under Model .

Insert the Device ID and IP Address into the columns.

Uncheck the Disabled checkbox column.

Wait for the software to link to the terminal.

Enter your Activation Key and click OK .