FingerTec FTDP (FingerTec Data Processor) - Manual (Page 7)

8
4 • USER MANAGEMENT
FTDP can also be used to manage user information (e.g. fingerprint templates, password,
Card ID, names, etc).
User data needs to be downloaded from the terminals and saved into the software be-
fore bering uploaded into other terminals (if any) without having to re-enroll the users.
Alternatively, you can opt to use an OFIS scanner to do enrollment through this page.
Enrollment can be done using the OFIS scanner without requiring users to enroll at the
terminal(s). The same applies to users who enroll using passwords or cards as their veri-
fication method. Enrollment of password or card can be done through the software, by
inserting the Card ID or the passwords. You can also delete users directly from any of the
terminals through this software (refer to section 4.5).
Downloading Users from the Terminal
To Download User: Click Users > Click Download > A pop-up window will appear >
Double click the IP address /name of the terminal to upload to > Select user IDs to down-
load or click “All” to select all users > Click on the data fields to be downloaded > Click
Apply to start download.