FingerTec Webserver - Manual (Page 21)

21
Click to com-
plete the installation of SQLyog
Community.
Once the installation is complete,
double click on the SQLYog icon
on the desktop. Key in the cre-
dentials as per below.
Click on icdat on the left window and key in the following command (GRANT ALL ON *.* TO
@’ IDENTIFIED BY ; FLUSH PRIVILEGES;) on the right window to
allow the webserver login.
After that, click on the double arrow to start the command.
Once you have performed all the installations as instructed, you may then proceed to TCMS
V2 to download the data.