GTCO SummaSketch FX - Users Guide - Manual (Page 11)

SummaSketch FX 11
8. The configuration is now complete and you are now ready to use the
Summagraphics tablet with AutoCAD. Exit to the drawing editor and enter Y to save
changes.
Installing the Real Mode Driver (For All Versions of AutoCAD)
Copy the file DGSUMMA.COM from the Drivers/Utilities disk to the hard drive and run the
driver before starting Autodesk applications.
Command Syntax: DGSUMMA [COM port] [transducer]
Examples
For a SummaSketch FX Professional with a four-button cursor connected for COM 2, type:
DGSUMMA/2/C4.
Sample Batch File
DGSUMMA/2/C4
CD/ACAD
ACAD
Installs driver
Changes to the application directory ACAD
Runs application ACAD
Configuring AutoCAD for the Real Mode Driver
After installing the Summagraphics ADI driver, start AutoCAD and follow the instructions
listed below. You will need to copy the file to the c:\directory or give a correct path name.
1. If running AutoCAD Release 11, choose Configure AutoCAD from the AutoCAD main
screen menu and press ENTER to proceed to the configuration menu. If running
AutoCAD Release 12, type Configure at the command prompt and select ENTER to
proceed to the configuration menu.