GTCO SummaSketch FX - Users Guide - Manual (Page 34)

SummaSketch FX 34
UIOF Tablet Configuration Utility
The UIOF Utility configures a tablet to UIOF/Microgrid format.
NOTES:
 When using the BA option (Base Address), all four digits must be specified.
(Example: for COM 1 - /BA03F8)
 Use the /BA switch only when the serial port is located at a non-standard address
within the computer.
 A summary of command line switches are always available by starting the program
with switch /? or /H.
Example
To configure a tablet on COM 2 for UIOF/Microgrid format, type: UIOF /2.