GTCO SummaSketch FX - Users Guide User Manual
Page 31
Advertising
SummaSketch FX 31
UIOFRST Command
The UIOFRST command resets a tablet that is configured for UIOF/Microgrid format.
NOTES:
When using the BA option (Base Address), all four digits must be specified.
(Example: for COM 1 - /BA03F8)
This program transmits in the UIOF/Microgrid default serial communication
configuration: 9600 baud, 7 data bits, even parity and 2 stop bit.
Use the /BA switch only when the serial port is located at a non-standard address
within the computer.
A summary of command line switches are always available by starting the program
with switch /? or /H.
Example
To reset an UIOF/Microgrid format tablet connected to COM 2, type: UIOFRST/2.
Advertising