GTCO MM II 1201 - Users Guide - Manual (Page 46)

MM II 46
A
C
D
PR
T Analog circuitry test; pass = 1, fail = 0
Stylus/cursor connection and coil test; pass = 1, fail = 0
Digital circuitry test; pass = 1, fail = 0
Stylus/cursor proximity; in-prox = 1, stylus/cursor out-of-prox = 0
Total test result (based on A,C and D); pass = 1, fail = 0
If the test result is a Hex 8FH or 87H, the tablet passed the tests. Another result means
that the tablet failed.