Haltech IQ3 Data Logger Dash - Manual (Page 42)

IQ3 Data Logger Dash Installation Manual
42
Motorsports Specific Software
Each type of motorsports places different demands on the software. As discussed on previously
in this manual, Racepak has created three configuration files, designed to cover a variety of
motorsports. The difference between the configuration files can be found in the Runlog page
area, which is screen area located below the main graph area. Here, the user will find a variety
of pages specific to their type of motorsports. To select any Runlog page, simply left click over
the MENU Runlog tab. This will access the 8 categories of pre-configured Runlog pages. Left
click over any category, to access individual pages.
All Runlog pages are copied into each new run, providing the user an opportunity to insert data
relative to each run. Data inserted remains with each run for current or later data analysis.
Road Racing / Circle Track Configuration File
Session Info and Weather
1. Session
2. Weather
3. Run Comments
Provides an input area for run numbering data, weather conditions and comments. Data is
inserted by the user, as needed
Map Setup
1. Create GPS Map
2. Add Map Segments
3. Add Inside - Outside Track (optional)
Provides an input area to create and segment track data. Additional information can be found
in the following section.
Map Analysis
1. Map Report
2. Lap Zoom
3. Segment Report
4. Segment Compare
5. Speed Compare
6. Min Max Avg Report
7. GG Plot
Provides an input area to review and analyze data. Additional information can be found in the
following section.