Haltech IQ3 Data Logger Dash - Manual (Page 75)

IQ3 Data Logger Dash Installation Manual
75
Creating Graph Sets for Display - Quick Graphs
Previously, we graphed data by placing the mouse cursor over the desired data channel and left
clicking. Often times, users will find the need to graph the same set of channels, each time data
is reviewed. It is possible to “build” graph sets that when selected, will automatically graph the
desired channels. These files are called Quick Graphs. To create a Quickgraph:
1. Erase all graphs by double clicking the Clear All Graphs icon
2. Graph the desired channels, in the desired colors.
At this time, we have pre-set the channels and colors we wish to save as a Quick Graph. To
name and save the Quick Graph:
1. Select the Quick Graph icon in the DataLink
toolbar.
2. Enter a name for the Quick Graph. For this example,
we used GPS_MPH.
3. Next, click on the Save button to save for later use.
We have now created and saved a Quick Graph. To recall a graph set for use:
1. Double click the Clear all Graphs icon
in order to remove all graphed data
from the Main Graph area.
2. Select the Quick Graph icon in the DataLink II toolbar.
3. Select the desired Quick Graph name.
4. Select the Load button.
The graphed data should automatically load, into the Main Graph area.