Haltech IQ3 Data Logger Dash - Manual (Page 6)

IQ3 Data Logger Dash Installation Manual
6
Manual Summary
This manual makes the assumption that you have installed the most current version of the
DataLink PC software and IQ3 firmware. IQ3 firmware and DataLink updates can be found at
http://www.racepak.com/IQ3Dash/downloads.htm. As of this writing, the most current
DataLink version is 3.1.0.
To compliment the overall simplicity of the IQ3 Data Logger Dash, we have created a User
Manual that is equally simple in usage. The following provides a quick view of the manual
layout:
1. IQ3 Features
a. Dash
b. Data Logger
2. Installation
a. Dash
b. Software
3. Programming The Display
4. Adding Sensors
5. Initial Run Data and Software Usage
Given the variety of motorsports in which the IQ3 Logger Dash is utilized, we have also noted
features specific to a given motorsport within the above sections. This will allow our customers
to quickly reference features that are most relevant to their type of racing.
Items Included With the IQ3 Data Logger Dash PN 250-DS-IQ3LD
Item
Part Number
IQ3 Data Logger Dash UNIT-DS-IQ3LD
512MB microSD Flash Card CARD-MEM-M512
SD Flash Card Reader 890-SD-RDR 8-1
Serial Communication Cable 280-CA-ST140SR
8 Position Wire Harness 280-CA-HARNIQ3L
GPS Antenna and Cable ANTG-ANN-05
DataLink Software N/A
Installation Manual MANL-IQ3LD