Haltech IQ3 Data Logger Dash - Manual (Page 47)

IQ3 Data Logger Dash Installation Manual
47
Boat Racing Configuration
Prop Data Math Channels:
Racepak personnel have installed a set of math channels that
provide data specific to boat racing analysis. This allows graphing and reviewing of prop data in
the main graph area, but has no affect on Prop Slip settings as programmed in the dash.
Prop Speed
Channel name: Prop Speed
The Prop Speed channel is derived from the input of Engine RPM, Gear Ratio, Prop Pitch and
internal mathematical functions. To activate channel, complete the Prop Data Runlog page.
Prop Slip
Channel name: Prop Slip
The Prop Slip channel is created from the input of GPS MPH and prop speed.
Session Info and Weather
1. Session
2. Weather
3. Run Comments
Provides an input area for run numbering data, weather conditions and comments. Data is
inserted by the user, as needed
Map Setup
1. Create GPS Map
2. Add Map Segments
3. Add Inside - Outside Track (optional)
Provides an input area to create and segment track data. Additional information can be found
in the following section.
Map Analysis
1. Map Report
2. Lap Zoom
3. Segment Report
4. Segment Compare
5. Speed Compare
6. Min Max Avg Report
7. GG Plot
Provides an input area to review and analyze data. Additional information can be found in the
following section.