Haltech IQ3 Data Logger Dash - Manual (Page 74)

IQ3 Data Logger Dash Installation Manual
74
Chart Scaling Sets - Universal Scaling Settings
The preferred method of graph scaling involves the creation of a Chart Scaling Set. A Chart
Scaling Set is universal, in that it has the ability to override all current scaling values. The Chart
Scaling Set applies the values to all selected channels, for all files, until removed by the user.
1. Select Settings, then Select Chart Scaling Set from the Main Menu selection.
The following dialog box will be displayed.
2. Enter the name you wish to call the new scaling set into the text entry box located
directly below the Select Name heading. For the purpose of our example, we will
use the name “New Scaling”.
3. Enter the name of the channel and the minimum and maximum graph values to be
displayed. For this example we will rescale the GPS_MPH data channel to graph
from 0 to 100 MPH. The data will be entered as shown below.
4. Select the Insert button to accept the rescaling values. The dialog box will appear as
shown below:
5. Enter the remaining data channels to be rescaled in
the same manner.
6. When you are finished, select the OK button.
To load a Graph Scaling set for use:
1. Select Settings, then Select Graph Scaling Set from the main menu selection.
2. Select the name of the desired scaling file to use by positioning the mouse cursor
over the name of the Scaling Set and click the left mouse button, the select the OK button.
NOTE: Channel names must be entered exactly as they appear on the Channel Button