Haltech IQ3 Data Logger Dash - Manual (Page 77)

IQ3 Data Logger Dash Installation Manual
77
Averaging Data Using the Averaging Cursor Action
The DataLink II software will automatically calculate average channel data, according to the
beginning and ending data displayed in the Main Graph area. There are times however, that a
detailed look at data in a particular area is desired. This can be accomplished by placing
Averaging Cursors within the Main Graph area.
With this action, the DataLink II software will provide minimum, maximum and average values
for data only between the Averaging Cursors. To perform this action:
1. Move the graph cursor to the desired starting point and press the [ key on the keyboard. A
vertical bar will be displayed on the graph.
2. Move the graph cursor to the desired ending point and press the ] key on the keyboard. A
second vertical bar will be displayed on the graph.
The Channel Grid Display will now be updated to show the current, average, minimum and
maximum values between the two Averaging cursors. To view the average values of other
graphed channels simply press the Tab key or move the mouse cursor over the Channel Grid
Button and click the left mouse button as described above.
To remove the averaging cursors from the display simply press the [ key and then the] key
without moving the graph cursor. The Averaging Cursors will be removed.