Haltech IQ3 Data Logger Dash - Manual (Page 82)

IQ3 Data Logger Dash Installation Manual
82
Starting a Telemetry Session
The next step is to start a telemetry session. Select the Telemetry icon or the New
Telem. Session menu item located in the File main menu election. A dialog box, as
shown below will be displayed and you will then be asked to select the Configuration file to use
for this session.
Select your configuration file. A dialog box will then be displayed to allow you to enter the
session information (the same as when downloading run data). Enter the appropriate year,
track, race type, and race sequence information as shown below. The system will enter the
date and time.
If you need help in completing the dialog box, select the Help icon located in the upper left-
hand corner of the dialog box.
Select Next. Additional dialog boxes may be displayed. These are part of the Runlog sections
that are user programmable to allow test information to be entered during the download
process. Complete the information as appropriate.