Haltech IQ3 Data Logger Dash - Manual (Page 44)

IQ3 Data Logger Dash Installation Manual
44
Tire Data
This Runlog page was designed to provide an area to input tire temperatures and pressure build
up, during track test events. However, the Tire Pressure Cold data should be entered before
the start of testing. Following a test run, if tire temp readings are obtained by means of a hand
held probe, the individual temperatures can be inserted into this Runlog page. By doing so, the
system can provide the following information:
1. Left Front Average 2. Right Front Average 3. Average Overall Front
4. Left Rear Average 5. Right Rear Average 6. Average Overall Rear
In addition, if the cold and hot tire pressure data is inserted, the system can provide the
following information: 1. Left Front / Right Front / Left Rear / Right Rear Pressure Gain