Interlogix NX-4 - Manual (Page 25)

NX-4 Control
Page 23
LOCATION 68 - AAC FAIL / AC FAIL RESTORE@ CODES (4 segments, numerical data)
Location 68 contains the tens and ones digits for a 4+2 format that will be sent if "AC Fail Reporting" is enabled.
Segment 1 contains the tens digit of the "AC Fail Reporting". Segment 2 contains the ones digit of the "AC Fail
Reporting". Segment 3 contains the tens digit of the "AC Fail Restore". Segment 4 contains the ones digit of the "AC
Fail Restore".
LOCATION 69 -
ALOW BATTERY / LOW BATTERY RESTORE@ CODES (4 segments, numerical data)
Location 69 contains the tens and ones digits for a 4+2 format that will be sent if "Low Battery Reporting" is enabled.
Segment 1 contains the tens digit of the "Low Battery Reporting". Segment 2 contains the ones digit of the "Low
Battery Reporting". Segment 3 contains the tens digit of the "Low Battery Restore". Segment 4 contains the ones
digit of the "Low Battery Restore".
LOCATION 70 -
AAUX POWER OVER-CURRENT / AUX POWER OVER-CURRENT RESTORE@ CODES (4
segments, numerical data)
Location 70 contains the tens and ones digits for a 4+2 format that will be sent if "Aux Power Over-current Reporting"
is enabled. Segment 1 contains the tens digit of the "Aux Power Over-current Reporting". Segment 2 contains the
ones digit of the "Aux Power Over-current Reporting". Segment 3 contains the tens digit of the "Aux Power Over-
current Restore". Segment 4 contains the ones digit of the "Aux Power Over-current Restore".
LOCATION 71 -
ABELL TAMPER / BELL TAMPER RESTORE@ CODE (4 segments, numerical data)
Location 71 contains the tens and ones digits for a 4+2 format that will be sent if siren supervision reporting is
enabled. Segment 1 contains the tens digit of the "Bell Tamper Reporting". Segment 2 contains the ones digit of the
"Bell Tamper Reporting". Segment 3 contains the tens digit of the "Bell Tamper Restore". Segment 4 contains the
ones digit of the "Bell Tamper Restore".
LOCATION 74 -
AEXPANDER TROUBLE / EXPANDER TROUBLE RESTORE@ CODE (4 segments, numerical
data)
Location 74 contains the tens and ones digits for a 4+2 format that will be sent if "Expander Trouble Reporting" is
enabled. Segment 1 contains the tens digit of the "Expander Trouble Reporting". Segment 2 contains the ones digit
of the "Expander Trouble Reporting". Segment 3 contains the tens digit of the "Expander Trouble Restore". Segment
4 contains the ones digit of the "Expander Trouble Restore".
LOCATION 75 -
AFAIL TO COMMUNICATE@ CODE (2 segments, numerical data)
Location 75 contains the tens and ones digits for a 4+2 format that will be sent if the "Fail To Communicate Reporting"
is enabled. Segment 1 contains the tens digit, segment 2 contains the ones digit.
LOCATION 76 -
ALOG FULL@ CODE (2 segments, numerical data)
Location 76 contains the tens and ones digits for a 4+2 format if the "Log Full Reporting" is enabled. Segment 1
contains the tens digit, segment 2 contains the ones digit.
LOCATION 77 -
AOPENING@ CODE (1 segment, numerical data)
Location 77 contains the tens digit of a 4+2 format if the "Opening Reporting" is enabled. The ones digit is the ones
digit of the user number that did the opening. If the user is greater than 9, the numbers will begin
repeating.
LOCATION 78 -
ACLOSING@ CODE (1 segment, numerical data)
Location 78 contains the tens digit of a 4+2 format if the "Closing Reporting" is enabled. The ones digit is the ones
digit of the user number that did the closing. If the user is greater than 9, the numbers will begin
repeating.
LOCATION 79 -
AAUTOTEST@ CODE (2 segments, numerical data)
Location 79 contains the tens and ones digits for a 4+2 format that will be sent if the "Autotest" or "Manual Test" is
enabled. Segment 1 contains the tens digit segment 2 contains the ones digit.
LOCATION 80 -
ARECENT CLOSING AND EXIT ERROR@ CODE (2 segments, numerical data)
Location 80 contains the tens digit for a 4+2 format that will be sent if "Recent Closing" and/or "Exit Error Reporting"
is enabled. Segment 1 contains the tens digit for the "Recent Closing Reporting". Segment 2 contains the digit for the
"Exit Error Reporting". The ones digit is the ones digit of the user who closed. If it is required to report Recent
Closings and Exit Errors for more than 9 users, Contact ID or SIA format must be used.