Juniper Systems Archer 2 User Guide User Manual
Page 11
Ch 1 Getting Started
7
The Home screen appears (layout varies by model).
Note: If you have a barcode, the Barcode Connector
screen is shown. Refer to Chapter 9 for details.
4. Press the power button to suspend the handheld.
Charge the battery pack at room temperature (68°
F or 20° C) for 4 to 5 hours. While the battery pack is
charging, the red LED blinks. When it is fully charged, the
red LED is solid.
Install the Operating System in Other Languages
The operating system is provided in English by default. It is
also available in French, German, Spanish and Brazilian
Portuguese. You can download the operating system in one
of these languages from our website. Go to
and select Downloads, then Archer
2. Full installation instructions are also available here.