Juniper Systems Archer 2 User Guide - Manual (Page 66)

62 Archer 2 Rugged Handheld Owner’s Manual
„
To collect a waypoint, tap the waypoint icon at
the bottom of the screen. Position information for the
waypoint is recorded.
„
Tap the edit icon to add or edit the name, description,
notes, and file type for this waypoint.
„
To navigate back to the waypoint you just collected, tap
the compass icon. A rotating compass is shown. Walk
in the direction of the red arrow. The distance shown
decreases as you get closer. Text saying Arrived is shown
and you hear a beep (if audio notifications are set up)
when you reach the navigation distance threshold set up
in GPS Settings.
„
Tap the disc icon to save the waypoint to \My
Documents\My Waypoints.
Collect Track Data
From the main JSNav screen tap the track icon to open
the Collect Track screen.