Juniper Systems Archer 2 User Guide - Manual (Page 29)

Ch 2 Hardware Components 25
Blue LED on the left (associated with shift functions):
„
Solid: When you press the shift key, the blue LED lights
up and stays on until another key is pressed. If the shift
function is locked, the blue LED stays on.
Only one LED is on at a time. The blue and green LEDs are in
the same location on the left. They are user programmable
through application software.
Flashlight
Geo units have a flashlight located underneath the camera
window in the back of the Archer 2.
The flashlight gadget must be on the Home screen in
order to use it. Tap on the icon once to turn on the brightest
illumination. Tap the gadget again for medium brightness,
and a third time to turn it off.
Note: This is also the camera flash.