Juniper Systems Archer Reference Guide - Manual (Page 148)

Index
141
removing 25
tightening 27
Torque specs for the standard cap 27
Touchscreen
calibrating 21
checking for damage or wear 97
cleaning 20 , 91
if the stylus responds inaccurately 21 , 97
location on Field PC
product specifi cations 2
protecting 20
Transferring fi les. See Copying; ActiveSync, transferring fi les
to and from the Field PC
Troubleshooting tips 96
calibration is incomplete 97
CF or SD card is not recognized 26
Field PC drops ActiveSync connection 98
Field PC runs slowly 97
touchscreen responds inaccurately 97
Turning off the backlight. See Backlight, turning off
U
Unlocking the device 97
Unlock position 23
Upcoming appointments 30
Up soft key 40
USB Client (mini B)
location on Field PC 5
using to create an ActiveSync connection 12
USB communications cable
Using to create an initial ActiveSync connection 12
USB devices 25