Juniper Systems Archer Reference Guide - Manual (Page 28)

Chapter 3: Using the Hardware
21
is sealed to protect your device against water and dust. To
protect your touchscreen, we recommend that you apply
a touchscreen protector to the screen. For instructions
about applying a touchscreen protector or cleaning your
touchscreen, see Chapter 10: Caring for your Field PC.
CAUTION: Be sure to replace the screen protector as often as
the screen protector packaging directs.
Calibrating the touchscreen.
If the touchscreen is not
responding accurately to stylus
taps, try calibrating the
touchscreen manually using the
following steps:
1. Tap Start > Settings. The
Settings window appears, as
shown here.
2. Select the System tab at the
bottom of the display.
3. Scroll down and tap on the
Screen icon, shown at right.
4. When the Screen window
appears, tap Align Screen.
5. Follow the directions on
the display to calibrate the
touchscreen.
6. After you calibrate the
touchscreen, the Screen
window appears again. Tap
OK to exit the screen.
!