Juniper Systems Archer Reference Guide User Manual
Page 24
Chapter 3: Using the Hardware
17
Suspending, powering off,
resetting, and restoring
factory defaults
The Power button allows you to suspend, power off , or reset
the device. A series of keyboard actions also lets you restore
the hard drive, settings, and icons to their original factory
defaults. Below are instructions for each action.
Suspending the device. Suspending the Field PC is diff erent
from powering it off :
•
Suspending the device puts it to sleep, and when it is
turned back on, the device remembers where it was.
Some battery power is used.
• Powering
off the device closes all programs and turns off
all of the power. No battery power is used.
We recommend suspending your device if you plan to turn it
off for less than two weeks.
To suspend your
device, press the
Power button briefl y
and release. To resume
the device from
suspend mode, press
the Power button
again.
Note: If you suspend
the device while it is
charging, the fl ashing
red light disappears.
However, the device
continues to charge.