Juniper Systems Archer Reference Guide - Manual (Page 48)

41
Chapter 5: Performing Common Tasks on the Field PC
Closing running programs
Closing programs that are not being used frees memory and
allows the device to run faster. We recommend closing any
programs you are not using.
Note: Tapping on the X in the top right corner of a program only
minimizes the program; the program continues to run in the
background.
To close one or more running programs, follow these steps:
1. Press the Applications
Manager button. The
screen at the right appears.
2. Select the program(s) you
want to close.
3. Tap End Task.
Switching
between
running
programs
To switch between programs running on your Field PC,
follow these steps:
1. Press the Applications Manager button.
2. Tap and hold program you want to switch to.
3. Tap Switch To from the pop up menu . The program
comes to the forefront.