Juniper Systems Archer Reference Guide - Manual (Page 54)

47
Chapter 5: Performing Common Tasks on the Field PC
Copying data from a
peripheral device
You can copy data from a CF card, SD card, or USB fl ash drive
onto your Field PC by following these steps:
1. On the Field PC, tap Start > Programs > File Explorer.
2. Tap and hold the fi le you want to copy to your Field PC. A
pop-up menu appears, as shown here. Note: If you want to
copy multiple fi les, tap and drag the stylus over the fi les. Once
the fi les are selected, tap and hold the stylus on the fi les until
a pop-up menu appears.
3. Select Copy from the pop-up menu.
4. Open the destination folder where you want to p lace
your fi le. (To copy the fi le to the device drive, select
My device .)
5. Tap and hold the stylus on the white space below
the list of existing fi les until a pop-up menu appears.
6. Select Paste . The copied fi le appears in the folder.