Juniper Systems Archer Reference Guide - Manual (Page 95)

When you are ready to use your Field PC again, follow these
steps so your battery pack runs effi ciently:
1. Plug the Field PC into a charger.
2. Charge the battery pack. (To check the battery power
status, tap on the battery icon at the top of the screen.
) Only charge the battery pack in temperatures
between 32°F and 104°F (0°C and 40°C). For best results,
charge the battery pack at room temperature (68°F or
20°C).
Protecting the touchscreen
Protect the touchscreen from impact, pressure, or abrasive
substances that could damage it. To further protect the
touchscreen, apply one of the screen protectors that came
with your Field PC.
CAUTION: Be sure to replace the screen protector as often as
the screen protector packaging directs.
To apply a screen protector, follow these steps:
1. Make sure the Field PC screen is free
of oils and
dirt. You can wipe it with a
microfi ber cloth.
2. Align bottom corners of the
screen protector with the
Field PC screen.
3. Smooth the screen protector while peeling back the
liner, working out air bubbles as you go. Continue
smoothing until the paper liner is removed.
Note: Some air bubbles may still be visible, but they fade away
in a short time. You can use a credit card to gently push out any
excess air.
!
88