Step 5, Step 4 – Bowflex XTL User Manual

Page 7

background image

Step 5:

Locate the Power Rod Pack. Slide Power Rod Pack onto top of Vertical Main Frame.
For easy installment, use a rubber mallet to tap rod box securely into Vertical Main
Frame. Be sure that holes on each side line up. Secure the two parts together by
tightening four of the #12 Screws through the four holes (two on each side) of the
Power Rod Pack.


If the screws do not go in easily, use soap or other lubricant in screw threads.

Power Rod Pack

Main Frame


Step 4:

Locate the Vertical Mainframe.
Attach U-Bar portion of Pulley Frame to the
Vertical Main Frame with the 3/8" x 2 1/2"
Hex Head Bolt.

Use the 3/8" x 4" Hex Head Bolt to secure
the lower portion of the Pulley Frame.
Tighten securely.

Tighten U-Bar securely.


It is best to

tighten both top &
bottom bolts at the
same time evenly.
Do not overtighten.

#12 Screw


Components for this

assembly are in Box 1

3/8" x 2 1/2"
Hex Head Screw

3/8" x 4"
Hex Head Screw

Vertical Main Frame

Components for this

assembly are in Box 2

This manual is related to the following products: