Keri Systems BioPointe Users Manual - Manual (Page 19)

Features
18
3.2 Local Administration from Device
Local administration means tasks can be performed at the device without the need for a host
program.
Master Authentication
Before any of these tasks can be performed, a master authentication is first carried out. The master
authentication allows the device administrator to enter the device administration mode, which
permits the device administrator to register new Master or User and access the device basic
configurations.
Each device can register up to a maximum of five Master fingerprints. You are designated as the
device administrator once your fingerprint is enrolled as a Master fingerprint.
During registration, each master has to provide a unique ID (Master ID). This Master ID will not be
required during the authentication to get into the administration mode. However, the Master ID is
still required when the administrator uses this particular ID during authentication for access control.
Tasks that can be Administrated Locally
The tasks that you can do at the device are listed out as follows. These tasks are described in greater
detail in Chapter 4.
• Enroll, delete any of three different authentication properties
• Delete the entire database
• Configure basic settings