Keri Systems BioPointe Users Manual - Manual (Page 4)

Getting to know the BioPointe
3
Using the Manual
If you are reading this manual for the first time, we suggest you read it from the start to end in order
to achieve an overall understanding of the features provided by the BioPointe.
However, if you are looking for specific information, you may turn to the Table of Contents to help
you look for the information you want quickly. The Table of Contents is on the next page.
In the chapters to follow, you will see the following chapters. The synopsis describes what you can
expect to find in each of these chapters:
• Chapter 1 - Getting to Know the BioPointe
Gives an overview of the BioPointe. Read this chapter to gain an overview of the device.
• Chapter 2 - Getting Started
Gives a quick and concise introduction to what you need to do to get started when you first
receive the device.
• Chapter 3 - Features
Gives a detailed description of the features provided by the BioPointe. The description is
divided into sections according to each feature. Read all or the relevant sections you need.
• Chapter 4 - Administering the BioPointe
Shows you how you can access the functions within the BioPointe such as enrollment. Read
this chapter to get started on enrolling the first fingerprint of the device.
• Chapter 5 – Performing Authentication on the BioPointe
Shows you how to use the device for fingerprint, card or card with PIN authentication.
• Chapter 6 – Configuring the BioPointe
Gives a description on how you can connect interfacing cables to the control board. Also
covers DIP switch settings.
• Chapter 7 – Communicating with the BioPointe
Gives a description on how to communicate with the device with RS232, RS4422 and RS485.
•
Chapter 8 – Interfacing to a Keri System Controller
Gives a description on how to interface to a Keri System Controller.
• Chapter 9 - Technical Specifications
• Chapter 10 - Troubleshooting
• Appendix A – Log Types in BioPointe
• Appendix B – Configuring the ADAM 4520
• Appendix C – Communicating in RS422 and RS485
• Appendix D – Communication Using Modem