Keri Systems BioPointe Users Manual User Manual
Page 80
Advertising
Appendix F – TCP/IP Subnet Mask Translation
79
Pin 4, 5 and 20 are shorted together at the modem side.
Modem to ADAM Converter (4520) Interface Cable
If the type of setup for modem communication is RS422 or RS485, the modem has to be connected to the
ADAM unit. The following diagram shows the wiring setup.
DB-25 Male (Modem side)
Pin at ADAM Side
Pin at Modem Side
2
2
3
3
5
7
Pin 4, 5 and 20 are shorted together at the modem side.
Modem Specifications
As listed under the section, Technical Specifications, the type of modem used at the Host and at the BioPointe
unit need to comply with the following specifications:
Advertising