Neuspeed 65.02.67 User Manual
Page 2
NEUSPEED® • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX •
• Visit us on the web…
http://www.neuspeed.com
11. Using needle nose pliers squeeze pin to remove one of the
sound amplifier hose clamps from air filter box lid.
12. Install clamp back onto hose and mark side of engine cover.
Remove engine cover off it’s rubber mounts by lifing up.
Drill a ¼” hole and deburr both sides of hole.
13. Reinstall engine cover and push clamp into hole to lock on.
14. Unscrew and pull-out MAF from air box lid.
15. Reinstall MAF to factory tube.
16. Install supplied silicone hose with smaller end onto MAF
using supplied #52 clamp.
17. Remove rubber grommet from lower air box and install into
hole of P-Flo bracket as shown.
18. Install NEUSPEED intake tube to P-Flo bracket and tighten
with supplied M6x12mm button head screws and nyloc nuts.
19. Loosely install supplied #56 hose clamp onto silicone hose.
Install P-Flo bracket onto mounts while inserting tube into
silicone hose. Install and tighten supplied acorn nut to
retain P-Flo bracket to isolator. Tighten #56 hose clamp.