Ip dhcp conflict logging, Syntax description, Defaults – Cisco 32369 User Manual

Page 25: Command modes, Usage guidelines, Example, Related commands

background image

ip dhcp conflict logging

Cisco IOS DHCP Server 25

ip dhcp conflict logging

To enable conflict logging on a Cisco IOS Dynamic Host Configuration Protocol (DHCP) Server,
use the ip dhcp conflict logging global configuration command. Use the no form of this command
to disable conflict logging.

ip dhcp conflict logging

no ip dhcp conflict logging

Syntax Description

This command has no arguments or keywords.


Conflict logging is enabled.

Command Modes

Global configuration

Usage Guidelines

This command first appeared in Cisco IOS Release 12.0(1)T.

Cisco recommends using a DHCP server database agent to store automatic bindings. If you decide
not to use a DHCP server database agent to store automatic bindings, use the no ip dhcp conflict
command to disable the recording of address conflicts. By default, the Cisco IOS DHCP
Server records DHCP address conflicts in a log file.


The following example disables the recording of DHCP address conflicts:

no ip dhcp conflict logging

Related Commands

clear ip dhcp conflict
ip dhcp database
show ip dhcp conflicts