ThermoWorks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual

Page 112

Advertising
background image

110

LogTag Analyzer User Guide (1.9)

Command

Explanation

Open... ( )

This will display the Open file dialog, which will allow you to

open:

ƒ LogTag files that contain readings previously

retrieved, or

ƒ previously saved Multi Chart configuration files.

It will start at the folder defined in the

File and Folder

Settings section in the Options.
If a Multi Chart file is selected, the LogTag Analyzer software

will automatically switch to Multi Chart mode and all the

selected files will be added to the Multi Chart display.

Close

This command will close all windows that are displaying

information about the open file that is currently selected. If no

files are currently open this command will not be visible.

Multi Chart (

)

This will change the way recordings are displayed such that

they are all combined on a single chart window (see

Combining Charts into a single chart).

Single Chart (

)

This will change the way recordings are displayed such that

each which will contain all the information retrieved from a

single LogTag.

Save ( )

This will save any changes you have made to the LogTag file

(or Multi Chart configuration) to your disk drive.

Save As...

This will display the Save As file dialog, which will allow you to

save a copy of the file currently being displayed in the same or

different folder with the same or different file name.

Upload ( )

This will send an e-mail with the currently active file attached

to a list of recipients or upload the file to a pre-determined

FTP site. See

Automatic e-mailing and uploading to FTP

sites.

Print... (

)

This will open a window allowing you to print a copy of the

LogTag file to an output device, which will typically be a
printer. This command is further explained in the section

"

Printing the results".

Print Preview

This will change the display mode of the software to show you
a copy of how a printout of the currently selected file and

window would look like. In "Print Preview" mode you will not

be able to zoom in or out of a chart. Click

to exit

the "Print Preview" mode and return to normal display mode.

Print Setup...

This will open a window allowing you to view and/or adjust

one or more of your printer's settings.

Page Setup...

This will open a window allowing you to view and/or adjust

one or more of your page settings, like printer margins and

page orientation.

Advertising