Logtag menu – ThermoWorks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual

Page 115

Advertising
background image

Chapter 7 Menus and Toolbars 113

Next group of Marks (

)

This command will show the readings recorded between the

last inspection mark shown and the next inspection mark

recorded. This command will only be available if the "Zoom

to Marks" command is enabled and the last reading recorded

is not currently visible.

Options... (

)

This will open a window allowing you to customize the

software. This command is further explained in the chapter

"

Customizing the software".

LogTag Menu

The "LogTag" menu contains commands that generally relate to the usage and interaction
with LogTags.

The following table outlines the commands and the explanation of each command that
may appear in the "LogTag" menu when using the LogTag Analyzer software:

Command

Explanation

Configure...

This will display a wizard to help you through the necessary

steps to prepare LogTags for their next use. This command is

explained in further detail in the chapter "

Preparing LogTags

for use".

Download...

This will display a wizard to help you through the necessary

steps to retrieve a copy of the recorded readings stored within

the LogTag(s). This command is explained in further detail in

the chapter "

Results from LogTag".

Hibernate...

This will display a wizard to help you through the necessary

steps to set LogTags to "Hibernation" mode. This command is

explained further in the chapter "

Prolonging battery life"

Wizard... ( )

This will display a wizard to help you through the necessary

steps to retrieve a copy of the recorded readings stored within

the LogTag(s) and then prepare the LogTags for their next use.
This command is explained in further detail in the chapter

"

Quick Start Guide".

Advertising