ThermoWorks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual

Page 90

Advertising
background image

88

LogTag Analyzer User Guide (1.9)

Use name and
password

Some SMTP servers require an
authentication method, especially if the

SMTP server you are using is not provided

by your ISP, e.g. if you are using e-mail

accounts from a hosted site. In this case

you need to tick this box and provide login

data for this SMTP server. Quite often,
though, you will not be required to use

Authentication.

User Name

Enter the user name you have been
allocated by your network administrator

required for Authentication. Please note

that for authentication this often needs to

include a full e-mail address rather than

just the SMTP login.

Password

Enter the password you have been given

by your network administrator required for

Authentication.

Name

Enter the name as it should appear in the

recipients e-mail program. This can be

your name ore someone else's name.

E-mail address

Enter the e-mail address that the recipient

can reply to by pressing the reply button of

his e-mail program. This can be your

e-mail address, or someone else's address.

Recipients

Enter the e-mail addresses of the intended

recipients. Pressing the "add" button will

bring up a new entry window where you
can enter a recipient's name and e-mail

address.

You can also highlight a recipient's name
and edit the data or remove it from the

list.

Subject Line

Text entered in this line will be displayed in
the subject line of the e-mail when

displayed on the recipients' e-mail
programs. Clicking on the

button will

allow you to specify some file related

information which will be entered into the

subject line at the time of sending. You

can enter your own text with the file

related information.

Advertising