Prepare logtag(s) for next use – ThermoWorks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual
Page 22
Advertising

20
LogTag Analyzer User Guide (1.9)
Prepare LogTag(s) for next use
The last Wizard screen involves sending the new configuration data to each LogTag to
prepare them for their next use. While the software is sending the new configuration data
to each LogTag the top of the window will look similar to the following picture. The
process of sending the new configuration data to each LogTag should take less than 20
seconds in total to complete.
Once the software has finished uploading the updated configuration information into each
LogTag, the window displaying the progress will look similar to the following picture.
Advertising
This manual is related to the following products: