ThermoWorks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual

Page 99

Advertising
background image

Chapter 6 Customizing the software

97

The button at the end of the edit control (

) can be used to assist you with defining

how file names are to be created by inserting the appropriate predefined element that
matches the information you want to use. Clicking on this button will display a popup list,
similar to the following picture to allow you select from the available elements.

To customize how the file name is created, you may use one or more of the available
elements in any order. If you use spaces to separate the elements, these spaces will
appear in the same location in the name of the file created. The letters must be in
uppercase or lowercase as shown in the following table (for example, "%ID" not "%id")
and all elements must be preceded by % if specified. Other characters that are included
will appear in the same location and unchanged in the file name creation.

Element

Meaning

%DATE

The date when the LogTag information was originally retrieved.

%DATE-TIME

The date and time when the LogTag information was originally

retrieved.

%FINISH

The date and time of the last reading recorded after being started. If

the LogTag was not started then this information will be blank.

%FINISH-DATE

The date of the last reading recorded after being started. If the LogTag

was not started then this information will be blank.

Advertising