Print preview toolbar – ThermoWorks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual

Page 119

Advertising
background image

Chapter 7 Menus and Toolbars 117

Switches into Multi Chart mode, with the average tabs active, or if already in

multichart, activates or disables the average tabs. It is recommended to deactivate

this feature when processing large data sets, as

Minimum, Maximum and Average

Charts (see "Special Chart Tabs" on page 59) can require considerable memory and

processor resources when activated.

Switches into Single Chart mode. Each chart that is currently open will be displayed in

its own window.

This will open a window allowing you to customize the software. This command is

further explained in the chapter "

Customizing the software".

This will log a user on to the software if no user is currently logged on or log off the

currently logged on user. This command will only be available if the software is

connected to the LogTag User Server software.

This will allow you to show the help topic on any particular command or topic that you

subsequently select.

Print preview toolbar

The print preview feature, available through the

File menu

, of the software will display

copy of the data as it would be included on a print out. When the software is displaying a
file in print preview mode, an additional toolbar will appear, similar to the following
picture.

Command

Explanation

Print...

This will open a window allowing you to print a copy of the

LogTag file to an output device, which will typically be a

printer. This command is further explained in the section
"

Printing the results".

Next Page

This will display the next page included in the print out. This

button will be disabled if there are no more pages available to
be displayed.

Prev Page

This will display the previous page included in the print out.

This button will be disabled if there are no previous pages
available to be displayed.

Advertising