Combining charts onto a single chart – ThermoWorks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual

Page 57

Advertising
background image

Chapter 5 Results from LogTag

55

Combining charts onto a
single chart

To overlay multiple charts in one view, select the Multi Chart (

) command. All charts

that are currently open will be displayed together. Additional files opened while in Multi
Chart mode (including data downloaded from LogTags) will be added to the display.

Each of the individual charts will be displayed with a letter symbol to allow you to tell
them apart. The legend contains an entry for each chart showing the chart name and the
corresponding letter.

You can change the background color for the Multi Chart display through the

Charts

section in the

Options

Window.

To remove charts from the Multi Chart display, use the Single Chart (

) command to

switch to Single Chart mode, then close the files you don't want to display. Select the
Multi Chart (

) command to switch back to Multi Chart mode.

Advertising