Saving a multi chart file – ThermoWorks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual

Page 64

Advertising
background image

62

LogTag Analyzer User Guide (1.9)

Saving a Multi Chart file

Click on the

toolbar icon or select the "Save" command from the

File

menu to save

the current Multi Chart configuration. Select a file name and location for your Multi Chart
file. The file extension for Multi Chart files is ".multi".

Note: The Multi Chart file should be saved in the same folder as the individual data files.
If any of the data files referenced in a Multi Chart file are renamed, deleted, or moved to
a different folder, the Multi Chart configuration cannot be displayed.

The configuration file contains information about the data files included in the Multi Chart
display, the subtitle, chart colors, and time offset (see

Shifting chart start times

).

Any annotations added to the Multi chart display are saved in a separate annotation file
with the file extension ".anno". This file must be located in the same folder as the Multi
Chart file to be included in the Multi Chart display.

To open a previously saved Multi Chart configuration file, click on the

toolbar icon or

select the "Open..." command

from

the File menu, then select the ".multi" file to be

opened.

To save a Multi Chart file under a different name, select the Save As... command

from

the File menu and enter a new file name.


Advertising