ThermoWorks HAXO-8 LOGTAG TRANSIT RECORDERS User Manual User Manual

Page 50

Advertising
background image

48

LogTag Analyzer User Guide (1.9)

Whenever the data displayed on the chart has been zoomed in to show more detail and is
showing only a portion of the charted data, if you click on the corresponding Data tab you
will see that only the readings shown on the chart are currently displayed. If you also click
on the corresponding Summary tab you will see an additional section of statistics that
have been calculated based on only the portion of readings currently being shown on the
Chart screen. Following is an example of the additional section of statistics that will
appear within the Summary Screen when a section of the readings within the Chart
screen have been zoomed in.

If there are readings beyond the limits of the sensor within the time interval that is being
displayed, the statistics for this interval will be displayed as "**".

The Zoom Out ( ) command in the

Edit menu

or on the

toolbar

can be used to revert

the display back to showing the range of data points that were showing prior to the new
zoom section being selected.

Advertising