Cisco 3200 User Manual
Page 103
Advertising
7-15
Cisco TelePresence System 3200
OL-14521-01
Chapter 7 Building the Second Row Table Assembly
Parts List
Figure 7-11
Foam Bumper Assembly
Step 12
Assemble the I/O modules for the inner molded foam bumpers.
Note
The Ethernet cables are of different lengths. Attach the Ethernet cables to the I/O modules as follows:
•
Use the 12M cable, 37-0965-01, for the I/O modules between sections 6 and 5
•
Use the 3M cable, 37-0887-02, for the I/O modules between sections 5 and 7
Note
Steps for routing the Ethernet and power cables are in
Chapter 9, “Routing Power and Signal Cables.”
Note
The flange on the I/O module cover piece is wider on the bottom than on the top.
204179
43
46
44
45
50
47 48 49
Advertising