Cisco 3200 - Manual (Page 192)

10-10
Cisco TelePresence System 3200
OL-14521-01
Chapter 10 First-Time Setup
Setting Up CTS Components
Figure 10-4 Camera Adjustment Screws
Figure 10-5 Correct Camera Target Alignment—Center Display
d. Place the small target on the table in front of the large target, and adjust the focus by completing the
steps in the
“Focusing the Camera” section on page 10-12 .
e. Remove the large target from the center part of the table, and attach it to the left part of the table,
placing the underside of the clamps into the recessed holes.
201205
Lens
Right
adjust
screw
Left
adjust
screw
Up/down
adjust
screw
Camera
rotation
screw
Camera
rotation
screw
Red plus
sign within
black cross
Red lines
Note curved
lines touching
screen border
Table
edge
205764