Cisco 3200 - Manual (Page 221)

12-13
Cisco TelePresence System 3200
OL-14521-01
Chapter 12 Field-Replaceable Unit Guide
Replacing a Plasma Display—Part Number CTS-DISP-65-GEN4=
Figure 12-4 Power and Signal Connections for Displays with DVI Connectors
Step 12 Hang the replacement Plasma display.
Step 13 Plug in the signal cable to the correct codec.
See Chapter 9, “Routing Power and Signal Cables.”
Step 14 Plug in the power cable to the correct PDU.
See Chapter 9, “Routing Power and Signal Cables.”
Step 15 Align and level the display and add the black seam tape.
See Chapter 3, “Mounting and Leveling the Plasma Displays.”
Step 16 If required, attach the camera cluster.
See Chapter 8, “Assembling the Remaining Cisco TelePresence Elements” and Chapter 9, “Routing
Power and Signal Cables.”
Step 17 Reassemble the display shelf sections.
See Chapter 4, “Building the Display Shelf Assembly.”
208400
Codec DMP On/Off Switch AC inlet