Cisco 3200 User Manual
Page 73
Advertising
6-5
Cisco TelePresence System 3200
OL-14521-01
Chapter 6 Building the First Row Table Assembly
Parts List
Figure 6-3
Foam Bumper Assembly
Note
Steps for routing the Ethernet and power cables are in
Chapter 9, “Routing Power and Signal Cables.”
Note
The flange on the I/O module cover place is wider on the bottom than on the top.
Step 4
Assemble the I/O modules for the inner molded foam bumpers.
204176
18
21
19
20
25
22 23 24
Advertising