Other devices – Cisco 3200 User Manual

Page 205

Advertising

10-23

Cisco TelePresence System 3200

OL-14521-01

Chapter 10 First-Time Setup

Setting Up CTS Components

Note

The Cisco TelePresence System can display information from multiple input devices during a meeting;
if multiple input devices are sending information, the projector displays the input from the last
presentation device sending information. If you do not see an image being projected on the screen, try
the following: for VGA devices, unplug the device from the VGA cable, wait 5 seconds, and then plug
the device back in; for document cameras: turn the camera off, wait 5 seconds, and then restart the
device.

Other Devices

Use Other Devices to check the Auxiliary Control Unit, which controls the individual light units
surrounding the displays in CTS conference rooms and enables the CTS to get more complete projector
status information and to restores projector defaults.

•

Click Other Devices on the Hardware Setup window.

•

Click the Start radio button to access the Auxiliary Control Unit to begin testing. To end the test,
click Stop.

–

Individual light units correspond to the five port numbers of the Auxiliary Control Unit. Click
the appropriate box to select a specific port number; Click Select All to select all ports (and all
light units) or Select None.