Figure 6-4 – Cisco 3200 User Manual
Page 74
Advertising
6-6
Cisco TelePresence System 3200
OL-14521-01
Chapter 6 Building the First Row Table Assembly
Parts List
Figure 6-4
Foam Bumper Assembly
Note
Steps for routing the Ethernet and power cables are in
Chapter 9, “Routing Power and Signal Cables.”
Note
The flange on the I/O module cover place is wider on the bottom than on the top.
Step 5
Attach the right wing tabletop section to the right Accessory Cabinet bracket.
204178
21
20
19
25
22 23 24
Advertising