Cisco 3200 - Manual (Page 36)

4-2
Cisco TelePresence System 3200
OL-14521-01
Chapter 4 Building the Display Shelf Assembly
Parts List
Caution The shelf segments are unstable during assembly. Use caution, and support all structures as required.
Caution Some system components have metal and plastic edges with hard angles. These edges are exposed until
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Caution In order to prevent scratching the Display shelves, you should avoid putting any tools on the shelf
surfaces.
Note The directions left and right refer to the assembly as you face the Plasma displays.
Accessory Cabinet
1 Accessory Cabinet, Right 700-29441-01
Kit # 69-1837-xx
1 47
2 Accessory Cabinet, Left 700-29442-01
Kit #69-1838-xx
1 48
3 Assembly Screen Supports No part number 2 Located inside of assembly cabinet.
These brackets are only required if
you use a Type 1 projector screen,
part number 800-28681-01. If your
installation uses the projector
screen with a product ID of
CTS3K-SCREEN and a part
number of 74-5416-01, do not
install these brackets.
4 M8 x 30 mm screws 69-1706-xx 14 1