Cisco 3200 - Manual (Page 161)

9-7
Cisco TelePresence System 3200
OL-14521-01
Chapter 9 Routing Power and Signal Cables
Power Requirements for the Cisco TelePresence 3200
Step 5 Route the extension cables for the Cisco Unified IP Phone, first row microphones, and (if required)
Ethernet connections in the first row table; then, connect the microphone cables to the microphones.
Tip Use the cable gutters in the privacy panels to route the cables.
Note Using masking tape or another method, note the microphone cables as they correspond to the
microphones. You use this information when you connect the microphone cables to the audio/video
extension unit in
Step 17 .
Figure 9-5 Table assembly Signal Cable Routing
Note Route the Table Leg Signal cables behind the Display structure, along with the other signal cables, but
do not plug them into any Codec.
201191
TelePresen ce
3 DEF 6 MNO 9 WXYZ #
2 ABC 5 JKL 8 TUV 0 OPER
1 4 GHI 7 PQRS
CISCO IP PH ONE
7970
Table Leg Signal
IP Phone Signal
Microphone Signal
Projector Signal
VGA Peripheral
5
5
4
3