Mounting and leveling the plasma displays, Parts list, C h a p t e r – Cisco 3200 User Manual
Page 25
C H A P T E R
3-1
Cisco TelePresence System 3200
OL-14521-01
3
Mounting and Leveling the Plasma Displays
Revised: September 16, 2009, OL-14521-01
Parts List
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Caution
Some system components have metal and plastic edges with hard angles. These edges are exposed until
you complete system assembly. Use caution when you move around the system during assembly to avoid
contact with any exposed system edges.
Note
The directions left and right refer to the assembly as you face the Plasma displays.
Key
Part Description
Part Number
Qty
Ctn
Notes
1
65-inch high-definition display
CTS-DISP-65-
GEN2
74-4881-xx
3
23,
24,
25
2
Black buffer strips
700-23981-xx
2
1
Display shelf section: left
95-9692-xx
Kit #
74-5304-xx
1
58
The Display shelves are used in this chapter for
leveling purposes only. The Display shelves and the
attaching bracketing hardware are described in
Chapter 4, “Building the Display Shelf Assembly.”
Display shelf section: center
95-9694-xx
Kit #
74-5306-xx
1
58
Display shelf section: right
95-9693-xx
Kit #
74-5305-xx
1
58
M8 x 20 mm screws
48-2273-01
1