YSI 600LS - User Manual - Manual (Page 158)

650 MDS Section 3
YSI Environmental Monitoring Systems Operations Manual 3-28
The user should also note the two windows in the upper portion of the display above, one designated “650”
and the other “Sonde”. All logging, either to sonde or 650 memory is controlled from these windows. As
indicated, data storage to the 650 is controlled from the upper left logging window. Storage to the sonde
memory is controlled from the upper right logging window. The highlighting cursor associated with the
logging windows can be moved within a particular window using the up/down arrows and toggled from
window to window using the left/right arrows. Note also that, if your sonde contains an optical sensor, it is
possible to activate the probe wiper prior to logging from the Sonde logging window.
While the following sections will show that the logging functions of the 650 have a high degree of flexibility
and capability, from a basic point of view, logging with the 650 is simple:
Sonde Logging
Window
650 Logging
Window
Sample Interval
Set in Sonde
Discrete sample
menu
Sample Interval
Set in 650
Logging setup
menu